Powersafe Neutral Panel Mount

£22.60£34.96 exc. VAT

Powersafe Neutral Panel Mount

Need Help? Use the Powersafe Configuration Guide.

    Reset options
    • £
    • £

    UL Connectors are rated at 455A (T5) & 615A (T8)

SKU: N/A Categories: ,


Powersafe Neutral Powerlock Panel Mount Connector

Phase 3’s Powersafe panel mount connectors are the highest rated, safest and finest quality neutral panel mounts as used by the power distribution, events, military and cable assembly industries worldwide. Powersafe Neutral Panel Mounts are electrical industrial sockets for generators, batteries, busbars, switchgear and power distribution boxes. The powerlock panel mounts are available for all three phases plus neutral and earth. Powersafe Sockets have the same mechanical locking system as their inline counterparts; secure coupling of plug and socket is achieved through an innovative mechanical locking system that disengages with a simple release key. The electrical industrial sockets are compatible with other manufacturer’s powerlock panel mount connectors.

Connections are secured with an M12 threaded post termination to a standard cable lug. The industrial sockets are rated either 500 amp (T5) or 800 amp (T8). The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out drawing details are available on the Technical Drawings tab. As an alternative, flange holes can be fitted with M6 threaded inserts for either front or rear fixing.

  • 500A sockets are manufactured with brass with silver plating (400 amp - 500 amp)
  • 800A sockets are manufactured using copper with silver plating (660 amp - 800 amp)
  • Buy fully assembled with: gasket, M12 threaded post termination, M12 nut and spring washer.
  • Available in neutral wire colour coding as blue, black, white and grey.

Panel Mount Drain Connectors (SPD)

Powersafe panel drain devices mate with Powersafe Neutral Source Plugs. Phase 3's drain powerlock connectors are supplied fully assembled with a female contact and male thermoplastic insulator.

800A Part Numbers (EU): SPD-N-BL-T8
500A Part Numbers (EU): SPD-N-BL-T5

Panel Mount Source Connectors (SPS)

Powersafe panel source devices mate with Powersafe Neutral Drain Plugs. Phase 3's source powerlock connectors are supplied fully assembled with a male contact and female thermoplastic insulator.

800A Part Numbers (EU): SPS-N-BL-T8
500A Part Numbers (EU): SPS-N-BL-T5

Safety & Performance Features

  • Mechanically Keyed to eliminate the possibility of cross mating
  • Secondary Locking prevent unintentional uncoupling under load
  • Finger-proof protection against electric shock IP2X
  • Waterproof & Dustproof to IP67 rated
  • Colour Coded for easy identification of three phase electricity
  • Innovative contact band allows higher rating (400A > 500A, 660A > 800A)
  • Contact band cannot come out
  • High Impact Insulator (no glass used & flame retardant)
  • Field Installation no special tools required
  • Gasket allows water tight securing to panel distribution boards

To Configure Your Connector:

  1. Select Gender
  2. Select Regional Colours
  3. Select Termination (Amps)
  4. Indicate UL Requirements

Need Help? View our Powersafe Configuration Guide.

Powersafe power distribution devices are the perfect safe alternative to Camlock Connectors. All our devices are fully compatible with Litton VEAM, 400amp and 660amp Powerlock panel mounts, ITT Cannon and other manufacturers.

Additional information

Weight 0.33 kg
Dimensions 13 × 6 × 6 cm

Source, Drain

Termination (Amps)

T5 (500A), T8 (800A)

Surge Current


Short Circuit Rating

Up to 35.5kA

Operating Current

1000V AC

Max Rated Voltage to Earth

2kV AC / 3kV DC

Minimum Flashover

9.5kV DC or AC Peak

Insulation Resistance

>5M ohms @ 500V DC

Ingress Protection

IP67 (EN60529)

Electric Shock Protection




Mating Cycles



-30°C to +125°C


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.