Powersafe Earth Powerlock Panel Mount Connector
Phase 3’s Powersafe panel mount connectors are the highest rated, safest and finest quality earth panel mounts as used by the power distribution, events, military and cable assembly industries worldwide. Powersafe Earth Panel Mounts are electrical industrial sockets for generators, batteries, busbars, switchgear and power distribution boxes. The powerlock panel mounts are available for all three phases plus neutral and earth. Powersafe Sockets have the same mechanical locking system as their inline counterparts; secure coupling of plug and socket is achieved through an innovative mechanical locking system that disengages with a simple release key. The electrical industrial sockets are compatible with other manufacturer’s powerlock panel mount connectors.
Connections are secured with an M12 threaded post termination to a standard cable lug. The industrial sockets are rated either 500 amp (T5) or 800 amp (T8). The standard connector is mounted to a panel through 4 fixing holes on the flange, panel cut-out drawing details are available on the Technical Drawings tab. As an alternative, flange holes can be fitted with M6 threaded inserts for either front or rear fixing.
- 500A sockets are manufactured with brass with silver plating (400 amp - 500 amp)
- 800A sockets are manufactured using copper with silver plating (660 amp - 800 amp)
- Buy fully assembled with: gasket, M12 threaded post termination, M12 nut and spring washer.
- Available in earth wire colour coding as green.
Panel Mount Drain Connectors (SPD)
Powersafe panel drain devices mate with Powersafe Earth Source Plugs. Phase 3's drain powerlock connectors are supplied fully assembled with a female contact and male thermoplastic insulator.
800A Part Number (EU): SPD-E-GN-T8
500A Part Number (EU): SPD-E-GN-T5
Panel Mount Source Connectors (SPS)
Powersafe panel source devices mate with Powersafe Earth Drain Plugs. Phase 3's source powerlock connectors are supplied fully assembled with a male contact and female thermoplastic insulator.
800A Part Numbers (EU): SPS-E-GN-T8
500A Part Numbers (EU): SPS-E-GN-T5
Safety & Performance Features
- Mechanically Keyed to eliminate the possibility of cross mating
- Secondary Locking prevent unintentional uncoupling under load
- Finger-proof protection against electric shock IP2X
- Waterproof & Dustproof to IP67 rated
- Colour Coded for easy identification
- Innovative contact band allows higher rating (400A > 500A, 660A > 800A)
- Contact band cannot come out
- High Impact Insulator (no glass used & flame retardant)
- Field Installation no special tools required
- Gasket allows water tight securing to panel distribution boards
To Configure Your Connector:
- Select Gender
- Select Regional Colours
- Select Termination (Amps)
- Indicate UL Requirements
Need Help? View our Powersafe Configuration Guide.
Powersafe power distribution devices are the perfect safe alternative to Camlock Connectors. All our devices are fully compatible with Litton VEAM, 400amp and 660amp Powerlock panel mounts, ITT Cannon and other manufacturers.